No listings in Underground Parking yet
There are currently no active products listed in this category. Post your requirement and let verified Turkish elevator manufacturers and global suppliers respond with competitive quotes — so you can compare offers and connect with the right partner at the best price.
Underground Parking Elevators — Frequently Asked Questions
What load capacity is required for a standard underground car-parking elevator?
A standard city-car parking elevator requires a rated load of approximately 2,500 kg to accommodate a typical European passenger car including occupants and luggage. SUV and multi-purpose vehicle platforms should be rated at 3,500–5,000 kg. Always verify the heaviest vehicle likely to use the lift and add a 10–15% safety margin. Turkish suppliers on elevator.tr offer standard capacity increments and custom engineering for oversized vehicle requirements.
How are underground parking elevators protected against corrosion?
The primary corrosion risks are vehicle exhaust condensate (carbonic acid), road-salt residue carried in by vehicles in winter, and standing water. Standard protection includes hot-dip galvanised structural steel (EN ISO 1461, minimum coating thickness 85 µm), stainless-steel AISI 304 or 316 guide rails, IP54-rated electrical enclosures, and epoxy or polyurethane paint systems on platform decks. High-aggression environments (coastal or heavy-use tunnels) may warrant AISI 316L components throughout.
What safety devices are mandatory on a vehicle parking elevator?
In addition to standard EN 81-20 safety requirements, vehicle-parking lifts require: vehicle over-height and over-width detection (typically infrared beams), anti-roll guards at platform edges, vehicle presence confirmation before descent, overload protection with automatic return to unloading position, and emergency lowering in the event of power failure. In seismic zones such as most of Turkey, EN 81-77 seismic-stop functionality and AFAD-compliant anchoring are additionally required.
Can existing underground parking ramps be retrofitted with a car elevator?
Yes, but the structural assessment of the pit and headroom is critical. A vehicle-parking elevator typically requires a pit depth of 1.2–1.8 m and an overhead clearance of at least vehicle height plus 600 mm. Load path calculations for the surrounding slab and foundations must be verified by a structural engineer before installation. Turkish modernisation specialists on elevator.tr can provide feasibility assessments and turnkey retrofit packages.