No listings in Sill & Door Panels yet
There are currently no active products listed in this category. Post your requirement and let verified Turkish elevator manufacturers and global suppliers respond with competitive quotes — so you can compare offers and connect with the right partner at the best price.
Elevator Sills & Door Panels – Frequently Asked Questions
What material is best for elevator sills in high-traffic buildings?
Stainless steel (AISI 304 or 316) sills are recommended for high-traffic commercial, retail, and hospital installations due to their superior wear resistance, hygienic surface, and corrosion resistance to cleaning chemicals. Aluminium sills are cost-effective for residential and low-traffic applications. Brass sills are used in heritage and luxury hotel restoration projects for their aesthetic appeal.
What is the standard sill groove depth and width for EN 81-20 compliance?
EN 81-20 specifies that the gap between the car sill and landing sill must not exceed 35 mm, and the depth of engagement of the door shoes in the sill groove must ensure the door cannot be displaced. Standard sill groove depths are typically 8–12 mm with groove widths of 12–20 mm, though manufacturers offer profiles matched to specific door shoe dimensions from leading operators such as Wittur, Fermator, and Selcom.
Can door panels be fire-rated?
Yes. Landing door panels in multi-storey buildings must meet fire resistance requirements under EN 81-58 (fire resistance test for landing doors). Fire-rated door assemblies are tested to EI30 or EI60 standards (30 or 60 minutes of fire and smoke integrity), and the entire door assembly — including frame, panel, and glazing where present — must be certified as a complete unit. Turkish suppliers on Elevator.tr offer EN 81-58 certified fire-rated door panel assemblies.
Are custom sill lengths and door panel finishes available from Turkish suppliers?
Yes. Turkish elevator door component manufacturers routinely supply sills cut to custom lengths and door panels in non-standard dimensions for project-specific requirements. Custom surface finishes including electroplating, special anodising, PVD coating, and bespoke lacquer colours are available from specialist suppliers on Elevator.tr for architectural and luxury projects.